MK3S VERTEX TEXTURED SHEET
VERTEX high quality grained textured foil for PRUSA MK3 / S / + and MK2.5 / S / +
CLEAN THE SHEET WITH SOAP BEFORE USING THE FIRST TIME
is a good quality product selected or made for VERTEX at a lower price than branded spare parts. Can see more here.
On this website using bank transfer, bank card or PayPal
Preparation 24/48 hours. Deliveries 24/48 hours on business days.
The surface of this sheet is covered with a special polymer (Ultem) to ensure perfect adhesion. Never clean the textured sheet with acetone and never apply ABS juice on itas you would cause the powder coating to crack and wear. Other solvents such as "Bearing Cleaners" may also contain acetone or other heavy solvents that can damage the blade . Also, don't use any metal spatula with the textured blade!
Let the sheet cool down and do not make sudden movements when removing the printed part.
- Ideal for extensive printing of PETG, CPE, FLEX / TPU, ABS, as well as any other type of filament
- Thinner than its smooth counterpart
- Before starting printing, degrease the sheet by wiping it with isopropyl alcohol (IPA) to 90% or more
Ultem breakage is not covered by warranty, it is only possible to break it if you have not followed the previous instructions.