• New


Tax included

1KG PLA filament for use in 3D printers.

Last items in stock


We accept payments by wire transfer or bank card.


Preparation 24/48 hours. Deliveries 24/48 hours on business days.

PLA Filament Specifications

Filament diameter: 1,75mm

Weight: 1Kg

Colour: Yellow

Nozzle temperature: 205-220ºC

Heatbed temperature: 60ºC


  •  Easi to print
  •  Good layer adhesion
  •  Low deformation
  •  Strong
  •  Brittle
  •  Low-temperature resistance

About PLA

PLA melts at a relatively low temperature of about 175 degrees Celsius. Unlike so-called thermoset materials, PLA can be heated past its melting point multiple times with very little degradation. It’s a hard material, but that also means it’s somewhat brittle, and once it breaks, it likes to shatter. Only this material is proven for 50 microns layer height.

However, PLA is not a perfect material and, just like every other plastic, has some disadvantages. The low melting temperature also means low-temperature resistance. Parts start to lose mechanical strength at temperatures over 60 °C.

The combination of being low in UV and temperature resistance means that it’s not ideal for outdoor use. Also, PLA is only soluble in chemicals like chloroform or hot benzene. So when connecting multiple pieces, you’re better off using just glue.

Even though PLA is on its own food safe, we do not recommend repeatedly drinking or eating from your 3D prints. Because of the small fractures on the print surface, bacteria can build up in there over time. You can prevent this by applying a food-safe coating. When post-processing PLA, it’s better to use wet sanding. Without water, you'll quickly start heating the plastic by friction, which will cause it to soften and make it hard to keep sanding.


Make sure the surface is clean before printing.


Data sheet

± 0.05mm

Specific References