EXTRUDER + PRUSA MINI VERTEX
has developed an innovative system with which, if you have the filament sensor, you can insert it inside and thus prevent it from hanging on the printer as if it were the original prusa mini.
This product includes:
- 1x Extruder + Vertex printed on PETG.
- 4x M3x40 Screws.
- 3x M3x10 Screws.
- 1x M3x30 Screw.
- 1x M3 hex nut.
- 1x M8 fitting.
On this website using bank transfer, bank card or PayPal
Preparation 24/48 hours. Deliveries 24/48 hours on business days.
Upgrade your Prusa Mini with the new dual gear + VERTEX Extruder to improve filament push into the hotend, plus a 3: 1 turn ratio for more control over motor movement.
Adjust the pressure of the gears on the filament easily with spring tension and access the gears for easier cleaning or maintenance.
Optionally, by printing the new Z carriage designed by Vertex, it is possible to anchor the extruder at three points (diagonal) in front of the two of the original (vertical). Compatibility is absolute both with Prusa MINI Original and Prusa MINI Clone
Available in several colors to choose according to your printer.