- New

Textured sheet for VERTEX XL-L. Double surface, on one side small and dense holes and on the other, wide and not very dense holes.
You have to adjust the first layer calibration for this sheet. You can save different sheets in the printer menu Settings > HW Config > Steel sheets > Sheet Textur1 > First layer cal.
If you have any questions, please contact us.
DO NOT USE ACETONE.
ALLOW THE SHEET TO COOL DOWN BEFORE REMOVING THE PARTS.
We accept payments by wire transfer or bank card.
Preparation 24/48 hours. Deliveries 24/48 hours on business days.